INDOOR/OUTDOOR FIXED MINI-DOME MOUNTS

The HD3, HD4, and HDPR Series housing mounts can be used to install Honeywell’s 3" and 4" fixed mini-dome cameras to a variety of surfaces. They provide a wide range of mounting options – to walls, ceilings, and a variety of indoor and outdoor surfaces.

The simple, solid design of these mounts is an installer’s first choice for ease of installation. Both the wall and pendant mounts provide easy cable routing with no exposed wiring, and the camera and lens can be installed, adjusted, and tested
without repositioning the housing.

The HD4 and HDPR Series mounts feature die cast aluminum construction and cool gray powder coating. These mounts are designed for either outdoor or indoor applications. The HD3 indoor Series mounts have polycarbonate construction in either black or cool gray powder coating. All are designed to perfectly complement the low profile, fixed mini-dome cameras, making them the obvious choice for architecturally sensitive installations.

FULL RANGE OF MOUNTS AND ADAPTERS FOR PTZ DOMES

Honeywell offers a complete family of mounts and adapters for the ACUIX™ and ACUIX ES domes. In simple or complex applications, these mounts and adapters offer affordability and space efficiency without sacrificing performance.

The HDXWM2 and HDVWM1 wall mounts are constructed of high tensile cast aluminum and can be mounted directly to a vertical load-bearing surface supporting up to 25.8 lb (11.7 kg). The HDXWM2 has a covered weatherproof cable access hole for ease of installation and can be corner or pole mounted using the HDXCMA1 corner mount adapter or the HDXPMA1 pole mount adapter. The HDVWM1 wall mount is for internal use only.

The HDPRM2 parapet and flat-roof mount has a unique rotating

1.5” NPT threaded mounting nut that allows for easy installation of the dome without having to twist the dome and wiring. The mount is designed to swivel within small clearance limits, which aids in maintenance and installation. The HDPRM2 is constructed of heavy-duty steel and is available in a warm gray finish. For wall mount applications, HDPRM2 mounts directly to vertical load-bearing surfaces or to a horizontal load-bearing surface for a roof mount application. The HDPRM2 supports up to 20 lb (9.1 kg) and can withstand winds up to 75 mph (121 kph) when properly fastened to a support structure.

The HDCM1 ceiling pendant mount utilizes a 1.5” NPT, is constructed of heavy-duty steel and is available a warm gray finish. The HDCM1 mounts directly to a horizontal load-bearing surface and supports up to 25.8 lb (11.7 kg). It has a unique rotating 1.5” NPT threaded mounting nut that allows for easy installation of the dome without having to twist the dome and wiring.